Filter By:
- Pumps/Inflation (54)
- Tools/Maintenance (1210)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Shop Home Bike Maintenance
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$21.95
- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles
- AM5201: spanner wrench for Crossfire and universal 4-slot freewheels
- AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels
- AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$16.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$12.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place.
Features:
- New and Improved
- 20mm of Adjustment
- Single Axle Position
- Slotted for Dropout
- ED Black Hardware
- Anodized Finish
Specs:
- Axle Size 10mm (3/8") only
- Material 6061-T6 Aluminum
- Hardware
- Stainless Steel
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel.
When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox.
Features:
- New and Improved
- 45mm of Adjustment
- XO Skeleton Design
- Dual-Sided Adjustment Grid
- Dual-Color Adjustment Block
Specs:
- Axle Size: 10mm (3/8") only
- Material: 7075-T6 Aluminum
- Hardware: Stainless Steel
$14.99
- Freewheel remover for use with single speed 4-key freewheels
- Can be used with a 24mm wrench
- Compatibility: 4-Key
$28.99
- For use on 8-key single speed freewheels
- Tool Type: Freewheel Remover
- Compatibility: 16-22T smallest cog (Gray)
- Compatibility: 13-14T smallest cog (Silver)
$3.99 - $30.00
- Developed by the Boeing company for lubrication and protection of aircraft components
- Dries to a thin waxy film that clings to metal for months
- Law prohibits ORM-D materials from shipping by air
$11.99 - $20.99
This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike
Product details
- Performance waterproof grease for bicycle bearings, seals, assembly, and more
- The formula reduces friction while performing longer between service intervals
- Superior water washout resistance stands up to power washing
- Unscented and undyed
- As with all grease, clean and remove old grease first to guarantee compatibility
- Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber
- Available in a wide range of sizes and dispensing methods
- 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun
$36.99
A compact multi-tool that is designed for integrated storage in compatible Trek road frames.
Compact and easily stowed
The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry.
Product details
- Designed for secure integrated storage in the new Domane with storage door
- CNC-machined keys for lightweight durability
- 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver
- Slim profile makes it easy to pack on any ride
- Ultralight aluminum alloy design
$44.99
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base.
Fresh air for your tires
Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost.
Product details
- Steel construction and replaceable internals provide long-term durability
- Auto-select head instantly fits both Presta and Schrader valves
- Large, stable base minimizes tipping
- Easy-to-read 3-inch base-mounted gauge
- Max pressure 160 psi (11bar)
$72.99
A versatile floor pump that allows for easy transition between high volume and high pressure settings.
A pump for road and MTB
The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike.
Product details
- Steel construction and replaceable internals provide long-term durability
- Auto-select head instantly fits both Presta and Schrader valves
- Large, stable base minimizes tipping
- Easy to read 4-inch base-mounted gauge
- Base-mounted switch allows for easy transition between high volume and high pressure settings
- High volume setting allows for quick inflation
- High pressure setting allows for easy inflation as PSI increases
- Max pressure 160 psi (11bar)
$154.99
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze.
Tubeless setup made simple
TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI.
Product details
- Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump
- Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor
- Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum)
- Compatible with both Presta and Schrader valves
- Included inflation accessories conveniently stored in handle
$12.99 - $36.95
Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.
$9.45
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems.
- Does not absorb water so regular bleeding is not necessary
- Non-toxic and will not irritate skin
- Will not damage frame finishes
$41.45
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes
-Does not include mineral oil
- Fits Brand: Campagnolo
- Hydraulic Fluid Type: Mineral Oil
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$203.04
Service tools to ensure long-term success of Chris King hubs.
- For intensive servicing of Ringdrive system found in most Chris King rear hubs
- Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual
- Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$49.99
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables
- Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
$7.19
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
$17.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime
$27.99 - $29.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m17 includes:
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Open wrench: 8mm, 10mm
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 168g
Warranty: Lifetime
$29.99
Tubeless tire plug kit plus CO2 head.
- Tire plug tool
- Tire plugs
- CO2 head
- Storage case
- Mounting bracket
- 5 year warranty
$29.99
- Tube / gear storage with hook-and-loop strap
- Tire plug tool + 2 plugs
- Tire lever
- Third party online sales strictly prohibited by manufacture
$38.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$39.99
The ultimate trail-side companion.
Details
- 20 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Chain Tool: 8/9/10/11/12 speed compatible
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Open Wrench: 8mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener
- Spoke Wrench: #0, 1, 2
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 203g
$39.99
- Reversible left/right entry bottle cage design
- Tire plug tool + 2 plugs
- Tire lever
- Third party online sales strictly prohibited by manufacture
$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$49.99
- 11 different tools housed in a composite storage case
- Plug tool and plugs
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- Bottle opener
$59.99
- 16 different tools housed in a composite storage case
- Plug tool and plugs
- Case features an 8-12sp chain tool and doubles as a handle for extra leverage
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- #0, 1, 2 & 3 spoke wrenches
- Bottle opener
$89.99
- Tube / gear storage with hook-and-loop strap
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T10, T25 torx tools
- Flat screwdriver
- Tire plug tool + 4 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic
HV pump, sold separately
- Optimized width for maximum pedaling clearance
- Third party online sales strictly prohibited by manufacture
$99.99
- Reversible left/right entry bottle cage design
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T10, T25 torx tools
- Flat screwdriver
- Tire plug tool + 4 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic HV pump, (sold separately)
- Optimized width for maximum pedaling clearance
- Third party online sales strictly prohibited by manufacture
$119.99
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T25 torx tool
- Flat screwdriver
- Tire plug tool + 2 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Storage tube
- Fits a spare chain link + 16/20g CO2, (sold separately)
- Third party online sales strictly prohibited by manufacture
$26.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel.
- Rubberized ergonomic handle
- Unique "thumb flange" makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims
- Lifetime warranty
$26.00
The Ultimate Tire Lever.
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel.
Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use
Unique “thumb flange” makes it easy to apply pressure to the tire bead
Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Multi-tool for DT aero spokes, torx, and square nipples
$21.99
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$25.00
- Professional wrenches fit internal nipples on many deep section aero rims
$27.60
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Works with Torx-style nipples found on DT Swiss Tricon Wheels
- This professional tool is designed for a precise fit and prevents rounding of nipples
- Metal nipple interface contacts torx nipple on all surfaces
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- This professional tool is designed for precise fit and prevents rounding of nipples
- Metal nipple interface contacts nipple on all four surfaces
- Fits 3.25mm square nipple interface
$36.50
Tools for working with DT Swiss spokes.
- Punch with concave head
- Improves seating of the spoke head in the hub flange
$65.40
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$70.00
Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening.
- Holds nipples in place but allows for up to 5 adjustments before compound breaks down
- Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
- Developed in conjunction with Loctite
- Includes two 10ml bottles
$75.00
EXP Star Ratchet Disassembly Tool- Ratchet EXP Hubs
$81.80 - $99.90
Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).
$232.10
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$29.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
$4.00
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks.
- Use when rebuilding Fox suspension to lubricate foam rings and seals
- Corrosion inhibitor
$20.99
High performance suspension fluid formulated to provide fade-free performance.
Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.
Page 1 of 21
Next page