Filter By:

  • Show More Brands
  • Show Fewer Brands

29-Inch

ENVE M630 29-inch I9 Wheelset
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
ENVE M730 29-inch I9 Wheelset
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
ENVE M735 29-inch I9 Wheelset
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
Roval Control SL 29 148
$1,900.00
What you're looking at here is gravity's nemesis: Roval's Control SL 29 Wheelset 148. At 1,330 grams, you'll climb XC courses with ease on these lightweight, hookless-bead, carbon hoops. They're built to withstand grunting up climbs, descending with abandon, and blasting in and out of corners with Specialized carbon rims, DT Swiss spokes, and DT Swiss's legendary 240 rear hub internals. The Boost spacing offers increased width on the front and rear hub flanges, and in turn, increased frame and fork clearance and stiffness. This combines to deliver a more durable wheel system at a minor weight penalty. Plus, these sweet race-ready wheels are tubeless-compatible so you are ready for anything that the trail throws at you.
Roval Control SL 29 Torque Tube 148 Wheelset
$1,900.00
The Roval Control SL 29 Torque Tube 148 wheels are nearly identical to the Control SL 29s, with the only exception being at the front hub. With the Torque Tube 148mm variant, you receive all of the benefits that Boost spacing offers while continuing to run a RockShox RS-1 fork. By increasing the width of the rear hub flange, and in turn, increasing frame clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. If you're running an RS-1, you'll get hand-built, ultralight carbon perfection with a Zero Bead Hook design. This design pairs perfectly with tubeless tires, while also increasing both strength and impact-resistance. Meanwhile, the rims have been laced via DT Swiss Competition Race spokes to strong alloy hubs with DT Swiss 240 internals (rear only) that serve-up lightening-fast engagement and acceleration.
Specialized Roval Traverse SL Fattie 29 148
$1,900.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Roval Control SL 29 Torque Tube Wheelset
$1,800.00
Gravity's grasp just got a little weaker. With Roval's Control SL 29 Torque Tube Wheelset coming in at an impressive 1,440 grams, you'll climb with ease. The lightweight, 30mm-wide carbon rims respond almost telepathically to accelerations, changes in direction, and the ins and outs of the trail. To add durability to the mix, DT Swiss's legendary 240 rear hub internals, SRAM's super-stiff Torque Tube front hub, and DT Swiss spokes make these wheels as ready for epic miles as they are light. And for versatility, the rear hub is compatible with a standard 135mm quick-release or a 142mm thru-axle. Please note: The front wheel only fits RockShox's RS-1 fork and the wheelset has a rider weight limit of 240 pounds.
Roval Roval Control 29 Carbon 148
$1,200.00
It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,200.00
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Whisky Parts Co. No.9 30w Rear 29-inch
$875.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape
Whisky Parts Co. No.9 36w Rear 29-inch
$875.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 40w Rear 29-inch
$875.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Race Face Next R 29-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Whisky Parts Co. No.9 36w Front 29-inch
$725.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 40w Front 29-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Stan's NoTubes Arch CB7 29-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Stan's NoTubes Crest CB7 29-inch Rear
$720.00
Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact-absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires
Stan's NoTubes Arch CB7 29-inch Front
$679.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Roval Roval Control 29 148
$650.00
When you think of lightweight XC wheels, aluminum probably doesn't come to mind. In reality, though, high-grade alloy wheels have all of the tremendous performance properties found in carbon, like light overall weight, durability, and resilience to impact. And when made with the right hands, they're perfect for competitive racers and everyday trail riders alike. The problem is that, while many carbon wheels can check these boxes with ease, most alloy wheels don't live up to these expectations. In the case of the Control 29 wheels, however, there’s finally an aluminum wheelset that's truly ready to race. What sets the Control 29 wheels apart is that they share many of the same advanced technologies as our carbon version, the Control SL. They adopt the same rim shape with a 25-millimeter inner width, extensive on-trail testing, and our Zero Bead Hook technology. Our Zero Bead Hook rim takes away the dated mountain wheel design known as a bead hook. This hook is the part of the rim that crests at the top, sitting several millimeters inward from the rim’s sidewall, and it catches the tire’s bead under its hook. We know this may not sound too bad, but the hook establishes a weak spot in the rim that's easily crushed or bent. Without a hook, a rim can be manufactured to much tighter tolerances and can be made lighter due to the hook not needing to be reinforced. For these wheels, this means that we're able to nearly equal the strength of carbon, while also making them lighter than many carbon wheels. More importantly, a Zero Bead Hook all but gets rid of the aforementioned weak spot in the rim that's plagued riders with flat spots and dents for decades. If you happen to be one of those riders that enjoys riding your four-inch travel XC bike like it’s a six-inch trail bike, you’re in luck. Our objective of low weight and reliability, at an accessible price, also carries into the Control 29 build. We hand-build each rim to our alloy hubs, which feature DT Swiss internals at the rear and a design that allows for the same spoke lengths at both front and rear, via perfectly tensioned DT Swiss Revolution J-Bend spokes and Pro Lock nipples. We fully support the art of hand-building and do so with our wheels, knowing that real people can catch things that a machine simply cannot. - Rim Type: Alloy clincher, 2Bliss Ready, Zero Bead Hook design - Rim Material: E5 high-strength alloy - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: Alloy body, 15mm thru-axle, 19 and 31mm OD end cap options included. - Rear Hub: CNC-machined alloy body, high-quality DT Swiss 360 internals, 148mm spacing, XD driver body. - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Total Wheelset Weight: 1690g
Specialized Roval Traverse Fattie 29 148
$650.00
In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Bontrager Line Pro 30 TLR Boost 29
$549.99 - $649.99
An industry-leading wheelset that makes upgrading to carbon wheels an easy decision. Rapid Drive 108 hubs provide instant engagement, while OCLV Carbon rims add confidence with best-in-class strength and durability. Line Pro 30 wheels crush the competition and are ready to conquer any trail. Key features: - OCLV Pro Carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 and Stacked Lacing dramatically increase wheel stiffness - Ultra-durable OCLV Carbon rim with 29mm internal 36mm external width 28 hole fr/r - 28 front/rear DT Swiss Aerolite14/17G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Bontrager Line Pro 40 TLR 29 Boost
$549.99 - $649.99
Wonderfully wide Instantly upgrade your traction and cornering performance with the Line Pro 40. The wide, durable, and lightweight carbon rim perfectly supports plus tires. The wheels are built around Rapid Drive 108 hubs for near-instant engagement to keep you powering through even the most challenging terrain. Key features - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - Boost 110/148 and Stacked Lacing dramatically increase wheel stiffness - Ultra-durable OCLV Carbon rim with 41mm internal, 46mm external width, 28 hole fr/r - 28 front/rear DT Swiss Aerolite 14/17G bladed spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes 21mm TLR tape, TLR valve, valve core removal tool
Bontrager Kovee Pro Wheel
$529.99
Admit it—your wheels are nice, but your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Pro wheelset. Designed with the XC and Trail rider in mind, these wheels will shave weight and increase stiffness to your ride, while offering the versatility you need for the right axle compatibility. - OCLV is ultra-light, compliant, and durable: the most advanced carbon available - Offset spoke bed reduces wheel dish for stiff and stable performance - Tubeless Ready (TLR) rims allow for quick upgrade to a tubeless system - Ultra-durable carbon rim (29mm outer, 22.5mm inner width) with 3-pawl drive system - 14/15/14 gauge spokes with Alpina locking alloy hex head nipples - Center Lock disc, Shimano 10/11 (11-speed SRAM XD driver available separately) - Includes TLR rim strip (installed), TLR valve, and valve core removal tool
Race Face Turbine 29-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Race Face Turbine 29-inch Front Wheel
$399.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Bontrager Line + TLR Boost Wheel
$374.99
Go wider while maintaining the downhill speed you crave. The Line Plus TLR 29-inch wheel's width provides unmatched traction and stability in the corners. The Tubeless Ready rim allows for a stress-free day enjoying the great outdoors. - Rapid Drive hub design instantly transfers effort into forward momentum - Boost models hub width (148r/110fr) and stacked lacing increase stiffness - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Offset spoke bed reduces wheel dish for stiff and stable performance - Interchangeable axles allow for compatibility with more frames and forks - Lightweight alloy rim (44mm outer, 39mm inner width) and 54 tooth Rapid Drive hubs - 6 bolt 110x15 front hub, 148x12 rear hub - Includes Tubeless Ready (TLR) rim strip, TLR valve, interchangeable axle parts
Stan's NoTubes Baron MK3 29-inch Rear
$374.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Stan's NoTubes Sentry MK3 29-inch Rear
$374.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction deliver width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 is a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and Presta valve; 12x142mm rear wheels include quick-release end caps and quick release. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
Stan's NoTubes Arch MK3 29 Rear Wheels (SRAM XD)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Stan's NoTubes Arch MK3 29 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Page 1 of 2 Next page