Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Cables

$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$10.00
Shimano Stainless Derailleur Cables
Cable Head: Shimano/SRAM
Cable Type: Stainless
Defined Color: Gray
Diameter: 1.2
Double Ended: No
Length: 3000 mm
Quantity Included: 1

$29.99
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)

$43.99
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$17.99
- Break-Away Quick Disconnect
- Time-saving system for managing brake cables on Break-Away bikes
- Light threaded alloy barrels with rubber noise dampener
- Available for both derailleur and brake cables
- Brake Quick Disconnect sold individually

$5.55
Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.

$8.99
Fittings for converting open loop housing holders on a frame to traditional cable stops.
- Fits snugly inside open loop and receives 5mm housing with no end cap
- Large flange for larger hydraulic loops
- Flattened on one side to accommodate frame

$11.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$34.99
Road Pro Brake kits offer enhanced performance and style. Like Road Pro Brake kits, Mountain Pro Brake kits are sold separately from our Pro Shift kits so you can create the best color combination for your bike. Pro level polished brake cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Mountain Pro Brake kits are easy to install.
- Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance
- All parts needed for a complete brake cable and housing install on road bikes are included
- Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Compatibility
- HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate
- HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX
- HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy
- HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC
- HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

$30.99 - $34.99
The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement.
- Pro Slick Polished inner cables reduce friction and have no coating to wear off
- Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance
- Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included
- Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing
- Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits
- Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification

$34.99
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install.
- Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance
- All parts needed for a complete brake cable and housing install on road bikes are included
- Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

$3.99 - $5.49
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

$5.49 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$5.00 - $10.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- Double-ended SRAM/Shimano mountain and road compatible cable ends
- Stainless steel construction resists corrosion
- Double Ended: Yes
- Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain
- Defined Color: Silver
- Quantity Included: 1

$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Page 1 of 7
Next page