Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

Crank Brothers Stamp 7 Pedals
$150.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Shimano PD-R7000 105 Pedal
$149.99
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
Ritchey WCS Carbon Echelon Pedals
$149.95
The world-beating performance of the Echelon just got better, thanks to the addition of a high-strength carbon fiber body that drops this already lightweight pedal down to an incredible 220 grams a set. The WCS Echelon Carbon pedal offers a proven pedal design in a lightweight, reasonably-priced package. This Keo-compatible pedal features a combination of bushings and bearings for extremely long life, adjustable spring tension and a composite body and high-strength carbon claw, and a low-profile cleat/pedal interface for maximum pedaling efficiency. The pedal's lifespan is also increased thanks to a sealed cartridge outer bearing. A stainless steel cleat promises excellent wear and no noise. The Echelon Carbon also offers adjustable tension with extra-strong springs for powerful riders. Works with Ritchey or LOOK Keo cleats. - Body: Carbon thermoplastic - Axle Material: CroMo - Claw: Carbon reinforced thermoplastic - Inner Bearing: Bushing - Middle Bearing: Needle - Outer Bearing: Sealed Cartridge - Float: 7 degrees - Finish: UD matte carbon - Weight: 220g
Chromag Scarab Platform Pedals
$147.00
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
Shimano PD-M647 Pedals
$139.99
Shimano's M647s are bear trap-style bad boys perfect for BMX, downhill, dual-slalom, freeriding, even technical cross-country. They feature a combination of dual-sided, pop-up Shimano SPD bindings for quick and easy entry and grippy platforms that hold your feet firmly when you don't have time to clip in. Cleat tension is easily adjusted, and the chromoly axles and sealed-cartridge bearings ensure these sweet pedals hold up to the toughest of conditions and use. - Cleats included
Crank Brothers Candy 3
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Crank Brothers Eggbeater 3
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Crank Brothers Mallet 3
$135.00
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
iSSi Trail III Pedal
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution. The Trail III is available in three spindle lengths, standard, +6, and +12mm. Longer spindle models are only available in Intense Black.
Spank Oozy Trail Pedals
$129.00
- A super slim 12mm for maximized pedal clearance, weight optimized trail pedal at 360g per set. - Forged alloy body is shot peened and anodized for increased durability - Equipped with forged hollow taper chromoly steel axles for unmatched strength - Sealed bearings, IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip and stability on trails - KEY TECHNOLOGIES: MGR, industrial grade axle assembly, chamfered leading edges - MATERIAL: Forged MGR alloy body, CNC optimized - PLATFORM SIZE (mm): 100 x 100 - PLATFORM PROFILE (mm): 12 - WEIGHT (g): ±360 / Set - AXLE: Cold forged chromoly steel - BEARING / BUSHING Full complement industrial sealed bearing, IGUS bushing - PINS: 18 steel pins (per pedal) - virtual concavity configuration - FINISH: Shot peen anodized, CNC logos
Xpedo GFX Pedals
$129.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Chromag Contact Pedals
$125.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
Time Speciale 8
$125.00
Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.
Crank Brothers Double Shot 3 Pedals
$124.99
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
Time ATAC DH 4
$120.00
For serious gravity aficionados only. The ATAC DH 4 is built like a tank for big drops, big rocks – the most extreme downhill trail conditions. The ATAC DH 4 is a downhiller’s dream featuring an aluminum body and oversized hollow steel axle. The ATAC system allows you to ‘put a foot down’ and clip it back in when needed. The open, self-cleaning design keeps the trail off the pedal, clearing debris and mud every time you clip in.
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist all-rounder take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included - Available with different spindle length options (+6 and +12mm) - Longer spindle models available in Blackout
Race Face Aeffect Platform Pedals
$119.99
• Thin platform, concave aluminum body with bottom loading pins. • Shorter spindle design shaves weight. • Thin concave platform • Reduced spindle length saves weight • Hex-head threaded pin design offers more bite for added security • Hidden / Grease access port for extended life • Platform size: 101x100cm • Cartridge bearings and DU bushings • 20 SHCS hex traction pins per pedal
Shimano PD-M8000 Deore XT Pedals
$119.99
• 7.7% more pedal-to-shoe contact vs. PD-M780 • 2.8mm wider pedal platform vs. PD-M780 • Mud shedding offset binding design • 0.5mm lower platform height than PD-M780 for pedaling stability • Robust retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong, durable chrome-molly spindle with 8mm hex wrench mount
Shimano PD-M8020 Deore XT Pedals
$119.99
• 11.7% more pedal-to-shoe contact vs. PD-M785 • 3.3mm wider pedal platform vs. PD-M785 • 0.5mm lower platform height than PD-M785 for pedaling stability • Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts • Robust retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong, durable chrome-moly spindle with 8mm hex wrench mount
Shimano PD-MX70 DXR Pedal
$119.99
PD-MX70 FEATURE - Increased retention strength for the forceful pedaling of BMX racing. - Wide pedal-to-shoe contact area for more support and grip. - Lower platform and cage height for pedaling stability. - Integrated cage improves control when not clipped in and protects binding mechanism. - Adjustable entry and release tension settings. - Color: Black - Average weight: 414 g - Remarks: Higher retention force and narrower release angle than normal SPD pedals 1.0mm cleat spacer included - Binding: Dual Sided - Cleat included: SM-SH51 - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - Reflector: SM-PD60
Spank Spike Flat Pedals
$119.00
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
Xpedo Baldwin Cromoly Pedals
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)
iSSi Road Carbon Pedals
$100.00 - $110.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Available in standard spindle length or +5mm - +5mm model only available in Intense Black - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single Sided Clipless - Spindle Material: Chromoly Steel - Weight: 266 grams
iSSi Trail II Pedal
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution. The Trail II pedals are available in three different spindle lengths, standard, +6mm, and +12mm. The longer spindle models are available in Intense Black.
Origin8 Fiend! All-Mountain Double Clipless
$109.99
Dual-sided "Pop-Up" clipless pedal with AL6061 die-cast body and CNC platform - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - Shimano SPD style cleat with 15º float - Platform size: 105mm x 103mm
VP Components VP-Vice Pedals
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
Time ATAC MX 4
$100.00
Fat bike, trail, and enduro riders will all enjoy the ATAC MX 4. With its large platform and ATAC system, the ATAC MX 4 is the perfect everyday, off-road or gravel road pedal. Cleat engagement is easy and positive in every condition and for every skill level. The hollow steel axle makes the pedal light yet durable. The open design keeps you rolling, clearing mud and debris every time you clip in.
Time ATAC XC 2
$100.00
Made for cross country MTB riders, the ATAC XC 2 pedal features the easy engagement and self-cleaning design of the ATAC system (TIME patent) and the durability of MIM (metal in mold) arches and a steel axle, all at an affordable price. The ATAC XC 2 is also suitable for cyclocross, trail riding, and bike touring.
Time ATAC XC 4
$100.00
The ATAC XC 4 pedal is designed for cross country mountain bike riders. It features a chromed, hollow steel axle making it light and durable. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 4 is also suitable for trail riding, bike touring, and gravel road riding.
Time Xpresso 4
$100.00
The Xpresso 4 is the perfect pedal for training. Built for everyday use, the Xpresso 4 features a stainless steel top plate and a hollow steel axle. A low stack height, an oversized pedal platform and a carbon blade with 3 tensions settings make this a very comfortable and efficient pedal. The ICLIC system requires only a light step to clip in making it a great choice for beginners or smaller riders.