Wheels

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

Replacement wheels for Strider Sports balance bikes - EVA-Polymer, no-flat, maintenance-free tire - Fits all 12" Strider models - Cartridge bearings - Wheel Size: 12-inch - Sold individually

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

- Disc-specific, tubeless-ready clincher rim with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance radial compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between the drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance, even at low pressures

Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.

Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.

A light, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Good things last A lightweight carbon mountain bike wheelset ready to tackle any trail and stand up to that rock you just didn't see. Line Pro 30 features best-in-class strength and durability and even helps prevent pinch flats. Plus, simple tubeless setup makes it easy to unlock their full potential and run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Ultra-durable OCLV Pro carbon provides a lighter layup for the ultimate in lightweight strength - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear DT Swiss Competition Race 14/16G spokes with Alpina alloy locking nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit

A durable road wheel with a 25mm inner width perfect for higher-volume road and gravel tires. A wider rim for a better ride The Paradigm Comp 25 road wheel adds traction, speed, confidence, and comfort to your ride, with a wider internal rim width that lets you run lower pressure for better tire support. Product details - 25mm inner rim width (30mm outer) offers added tire support to better suit larger-volume road and gravel tires - Rapid Drive 54 road hubs provide quick engagement for faster acceleration and increased control - Offset spoke bed reduces wheel dish for stiff and stable performance - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 23mm rim depth with 24 hole front/rear and DT Aerolite spokes - Centerlock disc with 12mm thru-axle and end caps available for 15mm conversion - Includes TLR rim strip and TLR valve for simple tubeless setup - No rider weight limit

A durable road wheel with a 25mm inner width perfect for higher-volume road and gravel tires. A wider rim for a better ride The Paradigm Comp 25 road wheel adds traction, speed, confidence, and comfort to your ride, with a wider internal rim width that lets you run lower pressure for better tire support. Product details - 25mm inner rim width (30mm outer) offers added tire support to better suit larger-volume road and gravel tires - Rapid Drive 54 road hubs provide quick engagement for faster acceleration and increased control - Offset spoke bed reduces wheel dish for stiff and stable performance - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 23mm rim depth with 24 hole front/rear and DT Aerolite spokes - Centerlock disc with 12mm thru-axle and end caps available for 15mm conversion - Includes TLR rim strip and TLR valve for simple tubeless setup - No rider weight limit

Roll fast, stop fast Paradigm Elite Disc is the ultimate high-performance Tubeless Ready disc wheel. The trusted DT Swiss star ratchet system offers a more responsive engagement, while stacked lacing provides a better bracing angle for stiffness, agility, and speed. Product details - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - Offset spoke bed reduces wheel dish for stiff and stable performance - Interchangeable axles allow for compatibility with more frames and forks - Lightweight alloy rim (23mm outer, 19.5mm inner width) - Compatible with Shimano 10/11spd, SRAM 10/11, Center Lock - No rider weight restrictions - Includes Bontrager TLR rim strip and TLR valve stem

Light, smooth, and durable Paradigm is perfect for the cyclist looking for reliable, durable performance at a great value and is packed with many of the features of our higher end wheels. Paradigm features a tubeless ready (TLR) design for easy tubeless conversion and stacked lacing which provides a better bracing angle for a stiffer wheel and more responsive ride feel. Choose Paradigm TLR road wheels for lasting durability and performance that won't break the bank. Product details - Tubeless ready (TLR) rims allow for quick transition to tubeless system upgrade - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 23mm outer, 19.5mm inner width, 3-pawl hub compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 26-inch

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

The front hub of choice for many riders around the world, we paired our Helix hubs to our Logic rim to make a truly unstoppable front wheel. Hub: WeThePeople Helix front hub Rim: WeThePeople Logic flash welded rim Special Features: - Super high-quality pro-level wheel - Aftermarket-spec WeThePeople Helix hubs - Includes nylon rim tape - Includes full set of nylon/fiberglass hub guards - Includes a second set of cones for use without hub guards

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Vision SC40 is the newest range of light and versatile carbon racing wheels, featuring 40mm deep rims, and disc brake hubs. They’ve been developed using extensive wind tunnel testing and on the road with professional cyclists of our sponsored teams, offering a great balance of performance and light weight at a competitive price. The full carbon rims are tubeless ready, while the alloy freehubs are compatible with Shimano 10-11 speed systems. Hand built to artisanal standards, with direct pull aero bladed spokes and ABS self-locking nipples for reliable performance and a clean rim design. - Full Carbon 40mm depth rim - Tubeless ready - Clincher rim (Max: 7 bar; 100 psi) - Centerlock rotor mount - 6 sealed cartridge bearings (2F + 4R) - DP Spokes - 24F / 24R - Includes rim tape (clincher) and spoke protector - Includes adapters for (front) QR and TA-15, and (rear) QR - Alloy Shimano 10-11sp driver

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H